Technical Details: Press burnishing tool for radii on the front side
Press burnishing tool for smoothening and strain hardening of radii
Application | radii on the front side |
Standard fixture | cylindrical shank Ø 16, Ø 20, Ø 22, Ø 25 mm |
Options
- Tailor made fixtures, HSK etc.
Application parameters
Please note that this information represents standard values which must be adapted to the individual cases.
Speed | 200–300 U/min |
Feed rate | 0,1–0,3 mm/U |
Workpiece allowance | bis 0,01 mm |
Tool preload | max. 3 mm |
Lubrication | emulsion or oil; filtration of the lubricant (<40 μm) can improve the surface quality and the tool life |
Premachining of workpiece | surface roughness (Rz) up to 8 μm |
Workpiece hardness | up to 45 HRC |
You require further information about this specific tool?
Please contact us or send us an e-mail. We will gladly inform you about further details on our tools:
Quickrequest: "Press burnishing tool for radii on the front side"Press burnishing tool for smoothening and strain hardening of radii.
Tool for smoothening and strain hardening of radii. Internal springs generate the required rolling force. The value of the rolling force is defined by the preload of the tool. The spring characteristics can be adapted to the requirements of the workpiece.
ADVANTAGES
- Short machining time
- Both workpiece or tool can be driven
- High productivity
- Low investment costs
- Simple replacement of wear parts
- Compact dimensions