Technical Details: Data sheet external diamond burnishing, angled tool type 2

Diamond burnishing tool for external use, compact

Application	external shafts, contours, plane surfaces, thin walled workpieces
Standard-fixture	square shank 16/20/25 mm left hand or right hand angle 15°/30°/45°/60°

Please note that this information represents standard values which must be adapted to the individual cases.

Speed	up to 150 m/min
Feed rate	0.05 — 0.2 mm/rev
Workpiece allowance	up to 0.02 mm
Tool pre-load	up to 1 mm
Lubrication	emulsion or oil; filtration of the lubricant (< 40 μm) can improve the surface quality and the tool life
Pre-machining of workpiece	surface roughness (Rz) up to 15 μm
Suitable for hard machining

Please contact us or send us an e-mail. We will gladly inform you about further details on our tools:

Simple to use
Compact design available for machines with limited tool space
Can be adapted to all materials by means of four spring elements (included in delivery)
Diamond radii from 0.4–5 mm available
Diamond indexed for multiple machining
Highest surface quality and hardening
Universally applicable
Ideal for contour machining
For hard machining and thin-walled workpieces
Tolerance compensation through spring-loaded design
Changeable diamond insert
Re-grinding of the diamond is possible
Cost-effective/low investment