Technical details: Diamond burnishing tool for external use
Diamond burnishing tool for external use
| Application | external machining of shafts, contours, flat surfaces and freeform surfaces |
| Standard fixture (D) | cylindrical shank Ø 10/12/16/20/22/25 mm |
Options
- Tailor made fixtures as required
- Tailor made diamond shape
- Assembly device
Application parameters
Please note that this information represents standard values which must be adapted to the individual cases.
| Speed | up to 150 m/min |
| Feed rate | 0.05 — 0.2 mm/rev |
| Workpiece allowance | up to 0.02 mm |
| Tool pre-load | up to 1 mm |
| Lubrication | emulsion or oil; filtration of the lubricant (< 40 μm) can improve the surface quality and the tool life |
| Pre-machining of workpiece | surface roughness (Rz) up to 15 μm |
Suitable for hard machining
Diamond burnishing tool for external use
are non-intrinsic tool for smoothening and work hardening of shafts, contours, flat surfaces and free-form surfaces.
ADVANTAGES
- universally useable
- suitable for hard machining and thin walled workpieces
- slim design enables the application in small spaced machine tools
- spring loaded diamond
- changeable diamond insert
- regrinding of the diamond is possible
You require further information about this specific tool?
Please contact us or send us an e-mail. We will gladly inform you about further details on our tools:
Quickrequest: "Data sheet: diamond burnishing, external use"